My old laptop died so I took the SSD from it in hope to use it as external drive. I wanted to just overwrite it with dd for security but I decided to go with f3 as that would also give me the opportunity to test the drive. Sadly, bad results came back
Data OK: 111.75 GB (234352247 sectors)
Data LOST: 14.13 MB (28937 sectors)
Corrupted: 14.11 MB (28905 sectors)
Slightly changed: 0.00 Byte (0 sectors)
Overwritten: 16.00 KB (32 sectors)
Average reading speed: 250.69 MB/s
S.M.A.R.T. data if you're curious
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0
5 Reallocated_Sector_Ct 0x0013 100 100 050 Pre-fail Always - 0
9 Power_On_Hours 0x0012 100 100 000 Old_age Always - 359
12 Power_Cycle_Count 0x0012 100 100 000 Old_age Always - 995
161 Unknown_Attribute 0x0012 100 100 000 Old_age Always - 236
163 Unknown_Attribute 0x0003 100 100 050 Pre-fail Always - 96
165 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 84
166 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 0
167 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 56
172 Unknown_Attribute 0x0012 100 100 000 Old_age Always - 0
173 Unknown_Attribute 0x0022 100 100 000 Old_age Always - 0
192 Power-Off_Retract_Count 0x0012 100 100 000 Old_age Always - 339
194 Temperature_Celsius 0x0023 059 059 000 Pre-fail Always - 41 (Min/Max 33/41)
196 Reallocated_Event_Count 0x0000 100 100 000 Old_age Offline - 0
198 Offline_Uncorrectable 0x0012 100 100 000 Old_age Always - 0
241 Total_LBAs_Written 0x0012 100 100 000 Old_age Always - 1847
242 Total_LBAs_Read 0x0012 100 100 000 Old_age Always - 2424
Yeah, barely used. Just the LBAs written/read doesn’t seem to make sense.
Any better ideas than paperweight?
I have tested it when it was new, it had no errors.
Take them apart, add the magnets to my massive ball of old hard drive magnets, shed a tear, order a replacement, and then move on 😂
Where are the magnets in an SSD?
There aren’t any
I can’t see the SMART data. May be something in there that gives me more information. Seems odd to me that an SSD would just go bad out of the blue - but if you’ve not turned on the drive or laptop in a while, that could be why. But honestly, it may just be fine after a full drive write - couldn’t hurt to try zeroing it w/ dd.
SSDs don’t like being left unpowered for more than a few months. All flash storage, actually. If you take out an SSD and stick it on a shelf for a few years, it’s unlikely that it’ll lose data - but it’s absolutely technically possible, and many companies won’t cover such data losses by warranty after a specified period of time.
I’m a bit baffled that this hasn’t popped up yet: Sell them on eBay.
Mark them as broken goods/scrap and re-iterate that fact very clearly in the product description. Broken drives often sell for up to 1/3 of the value of a working one, no scamming needed.I cannot tell you why that is, but my theory is that a lot of folk buy up broken drives in private sales in the hopes that the “broken”-diagnosis is just user error and that the drive is actually fine. Knowing my users that might actually be true in many cases.
Edit: I didn’t quite catch that you were not able to successfully overwrite your data. I guess that’s a point against selling it. Always encrypt your drives, that way you can always sell them when they break!
Aah that’s a pretty good idea. But I’m guessing it’s not the case for SSD’s?
It absolutely is, at least from my observations!
I’ve seen a few artists online use dead electronics to make really amazing multimedia art! If you can’t figure out a way to use it technically, maybe contact such kind of artist who could use the materials artistically?
I’d kinda trust it if it would detect the errors on its own, but now it’s just returning corrupt data, so I’d ditch it
From HDDs you at least had quality magnets and a bldc motor. SSDs go straight to electro trash.
deleted by creator
