My wife turned on the wall switch and the pendant light over our dining room table went out. The fuse outside didn’t blow—none of them needed to be reset. I checked for power in the light’s hanging cord, but nothing. I pulled the wall switch to check for power and nothing there either. Thoughts?

  • jubilationtcornpone@sh.itjust.works
    link
    fedilink
    English
    arrow-up
    4
    ·
    4 days ago

    Use a multimeter instead of a voltage detector. Those things are ok for a quick check but can be very unreliable.

    Is it possbile that the light is on a three way switch and the other switch is off someplace else? Also, are you sure the light is on the same circuit as the outlets? Do you know where the light switch feed comes from?

    • crozilla@lemmy.worldOP
      link
      fedilink
      arrow-up
      1
      ·
      edit-2
      4 days ago

      I was using the voltage detector just to see if ANY wire was live in the switch. Which none were. I’ll try the multimeter.

      AFAIK the switch is one-way. The circuit breaker has it labeled, “Dining Room/HallCloset.” The hall closet only has two functioning light switches—inside closet light and outside hall light—and there’s an outlet in closet, too, which is functional.