This looks like an amazing little box that can do almost anything. I’m wondering how people feel about the pricepoint
$679 early bird
$839 msrp
I’d love to grab one to use as a router/firewall, plus run any homelabbing containers I have on my NAS.
How’s the value proposition stack up? Price looks great to me considering the cpu and connectivity it offers.
Edit: Additional info
serve the home sponsored video sponsored but still really really informative. There’s a section near the end going through a tons of ideas of how to utilize the pci slot, including epanding nvme storage, external sas, extra networking etc. seems you can get over 40gb extra throughput from that port.
I think $700-800 for a server with SFP ports sounds like good value in terms of price relative to capability, but the absolute price and capability are probably overkill for a residential use-case (even a homelab one). It’s a no-brainer if you’re the Other Linus (the Tech Tips one) and have unlimited budget for all the latest electro-bling in your house, but if you’re any sort of normal person you don’t need 10 gig networking yet.
Does Minisforum make anything with 4 ethernet ports and a <100W TDP in the <$300 range? If so, get that instead.
If this can handle routing 10g this is a great choice to use as a router. It’s actually quite difficult to find a gateway that’s around this price and ISPs (at least here in Canada, or my part of Canada) are offering internet over 1Gbps at the same price as gigabit, but their routers are awful.
I use 10g between my main pc and my nas. It’s amazing. I use nvmes for triple a, intensive type games, and almost everything else gets installed on the nas. There’s great use cases for 10g.
I have a similar setup. Even for hard drives and slower SSDs on a NAS, 10g has been beneficial. 2.5 gig would probably be sufficient for most of what I do, but even a few years ago when I bought my used mellanox sfp+ cards on eBay it was basically just as cheap to go full 10g (although 2.5 gig Ethernet ports are a bit more common to find built-in these days, so depending on your hardware, that might be a cheaper place to start). But even from a network congestion standpoint, having my own private link to my NAS is really nice.
Also for media creation, using my main pc and nvme as a staging area and moving finished work and archived projects to my NAS is really helped along by the 10g connection I have. Easily saturates it with 6x7200rpm exos drives.
It says 2tb limit for SSDs which is odd? Maybe I am misunderstanding that.
I’m interested in hearing what folks who are interested had planned for this. It seems like it would be an overkill pfsense box. Could be a proxmox host for high IO vms but at rh same time kinda limited in terms of storage.
I would guess that’s not a hard limit. Maybe they decided to undersell it because many 4TB+ nvme drives are physically larger and/or require heat sinks, so they might not fit. I don’t see any details on their web site though.
Given two drives with the same size, same heat output, and same interface, it shouldn’t make a difference.
It’s pretty common to see fake limits like that on spec sheets. I can definitely put more RAM in my motherboard than is officially supported since higher-capacity DIMMs are out in the same form factor now compared to when the mobo was released.
That is strange that they would have size limit for the SSD. Maybe it only supports single sided M.2 drives, but if that’s the case, they should have just said it.
Single-sided drives can be up to 4TB though, no?
The Samsung pro I got is 4TB and single sided.
the pci slot would be able to be used for external storage, like connecting to a nas or das. serve the home found you can add one of these though I don’t think they tested that it can hit the max theoretical throughput of 96gbps.
Looks like it would eat power in a 24/7 setup but might be useful as an alternative to multiple systems.
Hmm that’s a good point. Though I think it shouldn’t be too bad unless under heavy load all the time. I think the CPU is made for laptops. That said it’d definitely have to be doing more than just working as an opnsense box
I’m wondering what all the Ethernet ports are good for in a home server setting? I have my box hooked up to the router but that’s it. Seems like overkill to me.
“Being a router” is what they are good for! Even needed.
Edit to be more specific: two switches in each of the 10gbit and redundant uplink would be a setup I can see, depending on your line.
No overkill there :)
That makes sense.
It could also be your router/firewall/server combo.
WAN, LAN, management And one to grow on!
I want one. The only thing stopping me is current server has ecc
deleted by creator
Note that the 2x10G is SFP+ not SFP. I was briefly confused. I have tons of SFP+ stuff but no SFP gear whatsoever
I updated it.
Got optic to SFP bridge from my ISP (only because I insisted on using my own router) , that was fed into SFP to RJ45 adapter that I have bought (via Amazon - apparantly the ISP’s have lobbied to not import it here) and then connected my router.
That went somehow ok untill I switched ISPs , now the optic cable is fed into an ISP provided decryption module , paired specifically to the mac address of my router.It’s like the ISPs went onboard with upgrading to optic because they could excert more control over their customers.
Looks amazing, but I really wanted amd so I could make a chimeraOS gaming console
Someone installed chimera os already! Should be in YouTube search results
I do think they’ll release an amd version
Acronyms, initialisms, abbreviations, contractions, and other phrases which expand to something larger, that I’ve seen in this thread:
Fewer Letters More Letters NAS Network-Attached Storage Plex Brand of media server package SATA Serial AT Attachment interface for mass storage SSD Solid State Drive mass storage
4 acronyms in this thread; the most compressed thread commented on today has 8 acronyms.
[Thread #428 for this sub, first seen 13th Jan 2024, 23:55] [FAQ] [Full list] [Contact] [Source code]
SFP: Small Factor Pluggable (I had to look it up)
I’d be curious to see how much cooling a SAS HBA would get in there. Looking at Broadcom’s 8 external port offerings, the 9300-8e reports 14.5W typical power consumption, 9400-8e 9.5W, and 9500-8e only 6.1W. If you were considering one of these, definitely seems it’d be worth dropping the money on the newest model of HBA.
I’m definitely curious, would only personally need it to be NAS + Plex server for which either of the CPUs they’re offering is a bit overkill, but it’s nice that it fits a decent amount of RAM, and you’re not forced to choose between adding storage or networking.
Great info thanks. Definitely agree, it’d be worth it for the lower power draw and lower heat output.
I’m a beginner homelabber with just a NAS and a repurposed alienware laptop. I’d be able to offload all containers I’m running onto the ms-01. Also 4k video can be really hard on the CPU so even if it’s overkill for just 4k video, that headroom is of course helpful, especially if you’re running multiple containers, or even if you have two or more people in the household streaming simultaneously
If I hadn’t just recently bought a Minisforum B550 Pro I would probably jump on this.
Ideally I would like a SATA port for putting a small SSD for truenas boot drive, then I could do a raidz with three nvme drives.
But we can’t have everything
When the site stops 504ing I’ll give it a look see.
I love Minisforum, I own 2 of them and I’m looking to buy a 3rd one. But damn their website is atrocious
